Tile and Stone Installation Salem Oregon

Tile, Stone, and Marble Installation Based in Salem Oregon

We provide excellent tile installation near Salem, Oregon. Also, with over 15 years of specialized tile, stone and marble experience, Lenny, our lead installer, offers a friendly and skilled approach that is sure to make you feel at ease. For example, to deliver a tailored proposal that meets your requirements, we will gather measurements of the designated area provide you with a customized quate that reflects your needs. Furthermore, our company is licensed, insured, and local, and boasts a high number of satisfied customers and references. Our team at “On Top” prides itself on guaranteeing your satisfaction with the chosen materials prior to closing the deal. Working collaboratively, we’ll establish a streamlined timeline that suits your preferences while keeping communication lines open to promptly address any apprehensions or questions you may have.

Tile Flooring Installation Salem Oregon

Much of our expertise lies in the installation of natural stone, marble, ceramic, porcelain, and granite tile flooring. We are located in Salem, Oregon and our installation methods have been honed through years of experience. The installation of tile flooring requires precision and intensive labor, most likely making it unsuitable for DIY projects. Usually, only seasoned professionals with years of experience can install tile flooring with the required level of skill.

Prior to the installation day, it is recommended to move your furniture and clear out China cabinets and closets. It may also be necessary to remove and dispose of old flooring, and take off the moldings and baseboards for the placement of stone.

There is a chance that after installing the new floor the doors may not have enough clearance to swing open freely. Our installers are willing to remove and rehang doors for an additional fee, while in some cases, addressing clearance issues may require the shaving or cutting down of the doors to achieve the proper clearance.

Proper substrate preparation is vital for tile installation. Cement subfloors permit direct application of mortar to facilitate tile laying. Conversely, wood subfloors necessitate using a cement backer unit (CBU). It’s crucial to recognize that substrate materials can sometimes move, which can cause tile cracking, chipping, or rising. Precision is paramount and advanced technologies, such as lasers, are used to guarantee precise measurements. As we work, we determine which pieces necessitate cutting to fit the required areas. The marked tiles are then expertly cut with a wet saw fitted with a diamond blade. The next stage involves applying the thinset mortar, which is a cement-based adhesive and using a trowel to spread it evenly across the surface. Tiles are firmly placed into the thinset for installation. It’s worth noting that the subfloor’s imperfections may require adjusting the amount of mortar applied to create a level plane. 

The width of the grout joints may vary depending on the type of tile being used. To maintain consistent spacing, wedges or spacers can be utilized, and the back of the stone tile may be coated with thinset mortar for added bonding strength. Once the stone tiles have been set and the thinset mortar has fully cured, the grout joints are then filled with sanded or un-sanded grout, determined based on the tile, grout joint, and width. The joints are filled by applying a mixture, which is then smoothed out with a sponge to remove excess grout from the tile surface. To complete the installation, an expert finisher is brought on board to install any necessary baseboards or woodwork. We install tile flooring in Salem Oregon with pride.

Tile Floor Installation Salem Oregon

Stone Tile Veneer Wall, Tile Backsplash, Fireplace Tile and Stone Firepit Stone and Barbeque Stone Wall Installation

Getting the wall ready properly is essential to having a successful backsplash tiling project. If there is already tile on the wall, we scrape between the tiles to loosen and remove old grout. After that we use a masonry hammer and chisel to tap the tile pieces free. If we’re laying tile over a bare wall, we patch any holes with spackling paste and use sandpaper to lightly smooth the surface of the work area. Then we use mild soap and water to clean your walls and allow the surface to dry. After that, we check the wall behind the stove for any oil or grease stains. Consequentially, stains will be cleaned with a degreaser or primer. Also, painted walls may be wiped down with tri-sodium phosphate and sanded gently, and glossy surfaces are typically sanded and de-glossed. Lastly, we wipe the wall with a soft cloth or damp sponge to ensure a clean, dry surface before installing the backlash.

Tile Backsplash Installation Salem Oregon

Manufactured stone veneers offer an appealing, resilient, and relatively low-upkeep alternative to natural stone. They can be easily applied to your home, and our experts will guide you through key installation techniques. Indeed, modern versions of stone veneer are so realistic that it can be difficult to differentiate them from authentic stone. Furthermore, because they are lighter and less costly than authentic stone, manufactured stone veneers are a fantastic option for any stone veneer assignment, such as constructing a stacked stone veneer fireplace.

We also install laminate wood floors and luxury vinyl planking flooring

Fireplace Tile Installation Salem Oregon

Areas We Serve

Keep your exterior surfaces clean in and around Salem, Oregon! Call us today at (971) 612-3069  or fill out our online form to get your gutter cleaning, holiday/ accent lighting, flooring, tiling, remodeling, and/ or roof cleaning started! These are just some of the major local areas; we serve other surrounding areas of the Willamette Valley as well.

Enter Your Info: